Picote DC1000E 100% Solids Epoxy Resin used with the Picote Mini and Maxi Coating Pumps is used to rehabilitate decayed and damaged concrete, PVC, fiberglass, copper, clay, steel/stainless steel, cast iron and ductile iron pipes. The dual colour method allows for clear visual verification during application. Designed exclusively for the Picote Brush Coating™ System.
This product has been created to renovate drains, sewers, water pipes, electrical conduits, heating and a/c ducts and more by brush casting a coating. The specially formulated coating resin forms a semi-structural enhancing corrosion resistant barrier inside the original pipe that is a tested, safe and environmentally friendly product. The new pipe corrosion resistant, wear-resistant and non-corrosive. Thanks to a high breaking stretch, it also withstands shocks and bending. The new pipe becomes elastic and antistatic.
1. Extend the life span of the original pipe: The resin can be used to prolong the life of an existing pipe. Clean the pipe well. Apply 2 coats. The new slick inner surface will increase the flow inside the pipe minimizing the risk of blockages.
2. Create a new semi structural pipe: Apply several coats of the resin forming a seamless new pipe with a 2-4mm wall thickness depending on the diameter of the drain. Estimated 30-50 year design life when using Semi Structural Design Specifications based on pipe diameter.
| Working Range |
1 1/4’’ t0 12’’ (DN32-300) |
| Recoat | Recoat: 3hrs @ 70ºF (21ºC) |
| Restore Flow | 4 hrs |
| Final Cure | 24 hrs (& for potable water) |
| Recoat after 12 hrs | Abraid first with Smart Cutter™ |
| Potable Water | 4" (DN100) and above (final coat must be white) |
| Min. Rate of coverage | 10 mils (0.3 mm) |
| Max. Rate of coverage | 20-40 mils (0.5-1 mm) |
