Developed by Picote specifically for the CIPP market.
Picote Push rods are deceptively simple. At first glance, they look similar to other push rods but we have put layers of thought, advanced technology and rigorous field testing into them. All of this combines to give you best rod on the market, making your working life easier and putting you firmly in control! Let's look at why you would be wise to add these to your professional CIPP tool kit.
THE PICOTE PUSH ROD DESIGN
- Picote Push Rods come in 1.5m lengths (5ft). Add rods until you build up the required custom length for your project; even if the actual length is different to the plans or project estimate, you can adjust the length mid-project
- Twisting your custom-built rod assembly is easier than turning a traditional (longer) rod into position. Adjusting the lining, patch or connection collar, becomes much easier
- They are available in two flex-level options, black rods for in-house lining and grey rods with more rigidity for use underground
- Lock the rods together for secure pushing and pulling with no coiling or spring-back, giving you total control
Picote Push Rods work with:
Picote Pro Packers,
Picote Connection Collar System 2.0
the Picote Grabber Head for Push Rods
AND
the NEW Picote Mini Multi-Cutter!
USE PICOTE PUSH RODS
WITH:
- The Picote Connection Collar System with Push Rods can be used with steam for a faster cure and the steam ports are built-in
- Picote Connection Collars can be installed from the main or the lateral and the orientation can be changed very quickly mid-way through a job if needed, reducing your risk of resin curing before you have installed it!
- We have designed the connections between the rods to be solid when locked together and the rods and turning handle are super-sturdy so as you turn the handle, the rods turn at the same speed and to the same extent. This means there is no springing back, or over-turning from all of that tension.
- Our Push Rods are perfect for use with the Picote Pro Packers allowing you to push, pull, rotate, inflate and extend the reach of the repair
- They contain our locking technology which is so compact that the rods are flexible enough to be pushed through multiple 90° bends (watch here)
- There is no need for additional external air lines.
- Combined with the Pro Packer Front Wheel Drive system, you really are in total control!
- Powered by BZ BOTS, harness the power of the Mini Miller +C HD. up to 2900 rpm!
- Mechanical Robot with modular parts for easy repair.
- NO large compressor needed.
- Navigate multiple bends!
- Operate from the vertical stack pipe or mainline pipe!
- Cut out concrete and failed linings in pipes from DN100-150 (4-6").
- Push and Pull with Picote multi-use Push Rods.
- Reinstate CIPP connections FAST.
- Total reach 16m (50ft) plus optional extension of 10m (32ft).
- Selection of cutting heads and Mini Multi-Cutter available to pre-order now!
An additional benefit is the option to add the Picote Grabber Head for Push Rods onto the end. This enables you to retrieve cut-out lining, lost tools, broken pipe, rubble and much more! Operated with the same compressed air lines as the Pro Packers and Connection Collar System.
"Overall the aim of our design process is to make it as simple and risk-free as possible from start to finish. Everything we do is targeted at making the experience for the end user as close to perfect as we can get it."
-Olav Toonroos, Technical Manager at Picote Solutions